This page provides step-by-step instructions on how to enter and edit Subpart Q Iron and Steel Production coke pushing operation information. Operations identified should include coke pushing occurring (coal charged) at both byproduct and non-recovery coke oven combustion battery stacks.
Step 1: Add a coke pushing operation
To add a coke pushing operation, find the COKE PUSHING OPERATIONS table on the Subpart Overview page and click the link titled "ADD a Coke Pushing Operation."
Click image to expand
To later edit information identifying a coke pushing operation, click the edit icon or the Name/ID link located in the first column of the table.
To delete a coke pushing operation, click the delete icon located in the last column of the table.
Step 2: Enter required information for the coke pushing operation
For each coke pushing operation at your facility, Subpart Q requires you to report the following information:
- A unique name or identifier, plus optional description
When you are finished, click SAVE.
Click image to expand
Step 3: Repeat Steps 1-2
Repeat Steps 1-2 until all coke pushing operations have been added for your facility.
See Also
Screen Errors
Using Cal e-GGRT to Prepare Your Subpart Q Report
Subpart Q Process Unit Information for Units NOT Monitored by CEMS
Subpart Q Process Unit Information for Units Monitored by CEMS
Subpart Q Coke Pushing Operations Information
Subpart Q Flares Information
Subpart Q Emissions Information for Units NOT Monitored by CEMS
Subpart Q Emissions Information for Units Monitored by CEMS
Subpart Q Emissions Information for Coke Pushing Operations
Subpart Q Emissions Information for Flares
Subpart Validation Report