This page provides step-by-step instructions on how to enter and edit Subpart H Cement Production kiln information for kilns that are monitored by CEMS.
To add a kiln that is monitored by CEMS, find the CEMENT KILN SUMMARY (Cement Kilns Monitored by CEMS) table on the Subpart Overview page and click the link titled "ADD a Cement Kiln Monitored by CEMS."
To edit identification information for a kiln, click the edit icon or the Name/ID link located in the first column of the table.
To delete a kiln, click the delete icon or the red “X” icon located in the last column of the table.
Click image to expand Cloak |
---|
cloak.toggle.zone | true |
---|
id | PNG1 |
---|
cloak.toggle.type | none |
---|
|
|
Panel |
---|
|
For each kiln that is monitored by CEMS at your facility, confirm whether or not the kiln utilizes CEMS.
Note |
---|
Note that when adding a new kiln you are prompted to answer the CEMS question immediately (the answer to this question will default to “No” for kiln added using the “ADD a Cement Kiln” link and will default to “Yes” for units added using the “ADD a Cement Kiln Monitored by CEMS” link). |
The CEMS response may be changed here and the kiln information will be relocated to the appropriate table on the Subpart Overview page.
Click image to expand Cloak |
---|
cloak.toggle.zone | true |
---|
id | PNG2 |
---|
cloak.toggle.type | none |
---|
|
|
Panel |
---|
|
When finished, click SAVE to save your data.
For each kiln that is monitored by CEMS at your facility, Subpart H requires you to report a unique identifier and optional description
Click image to expand Cloak |
---|
cloak.toggle.zone | true |
---|
id | PNG3 |
---|
cloak.toggle.type | none |
---|
|
|
Panel |
---|
|
When finished, click SAVE to save your data then click BACK TO OVERVIEW to return to the Subpart Overview page.
To enter additional required information for a kiln that is monitored by a CEMS, locate the kiln in the CEMENT KILN SUMMARY (Cement kilns monitored by CEMS) table on the Subpart Overview page and click OPEN.
Click image to expand Cloak |
---|
cloak.toggle.zone | true |
---|
id | PNG4 |
---|
cloak.toggle.type | none |
---|
|
|
Panel |
---|
|
For each month and for each kiln, enter the following required information:
- An indication if a missing data procedure was used to determine the monthly clinker production
- Clinker production in short tons
Click image to expand Cloak |
---|
cloak.toggle.zone | true |
---|
id | PNG5 |
---|
cloak.toggle.type | none |
---|
|
|
Panel |
---|
|
When finished, click FINISHED.
Repeat Steps 1-4 until all kilns that are monitored by CEMS have been added for your facility, then proceed to Subpart H Emissions Information for Kilns Monitored by CEMS.
#Back to Top
Screen Errors
Using Cal e-GGRT to Prepare Your Subpart H Report
Subpart H Summary Information for this Facility
Subpart H Kiln Information for Kilns NOT Monitored by CEMS
Subpart H Emissions Information for Kilns NOT Monitored by CEMS
Subpart H Emissions Information for Kilns Monitored by CEMS
Subpart Validation Report