Certain validation checks which are considered critical errors must be corrected before you can successfully generate your submission package or upload your XML-based submission. These checks are presented to the reporter when they attempt to generate or regenerate their submission or after they attempt to upload an XML-based submission. These checks are signified with a stop sign 
in your validation report. The table below provides a list of critical errors. Additional technical information that may assist XML uploaders is also available at XML Upload Critical Errors. If you feel that you have triggered one of these checks in error, or if there’s a reason why your report should be submitted despite the check being triggered, you may submit a request to the e-GGRT Help Desk at GHGReporting@epa.gov.
| CODE | SUBPART | TYPE | MESSAGE_TEXT |
|---|---|---|---|
| CEMSML-1 | Q | Data Completeness | Monitoring Location (CML) process units. You have added one or more units monitored by CEMS, but have not yet added a CEMS Monitoring Location (CML). |
| CEMSML-2 | Q | Data Completeness | CEMS Monitoring Location (CML) process units. You have indicated that this unit is monitored by CEMS, but you have not yet associated it with any CEMS Monitoring Locations (CMLs). From the Subpart Overview page, click on the CML Name/Identifier to which this unit exhausts (or use the "ADD a CEMS Monitoring Location" link to create a new one). On the bottom of Add/Edit CEMS Monitoring Location page, use the "ADD/REMOVE a process unit that exhausts to this CEMS Monitoring Location" link to select this unit. |
| CML-001 | Q | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-002 | Q | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-007 | Q | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-007X | Q | Screen Error | Total carbon dioxide (CO2) emissions measured by the CEMS (or applicable Part 75 methodology). This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-012 | Q | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. You must correct this before continuing. |
| CML-013 | Q | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-014 | Q | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-016 | Q | Screen Error | Carbon dioxide emissions in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-018 | Q | Screen Error | Carbon dioxide emissions in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-020 | Q | Screen Error | Carbon dioxide emissions in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-022 | Q | Screen Error | Carbon dioxide emissions in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-027a | Q | Data Completeness | Fraction of nitrous oxide emissions from CML. This data element is required. |
| CML-034 | Q | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-035 | Q | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-036 | Q | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-037 | Q | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-038 | Q | Screen Error | Total number of source operating hours in the reporting year. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-039 | Q | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-040 | Q | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-041 | Q | Screen Error | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas moisture content. This value should be reported as a number of hours in the reporting year, and should be within the range of 0 to 8784 (hours). The value you provided is outside that range. You must correct the current value before continuing. |
| CML-043 | Q | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for stack gas flow rate. This data element is required. |
| CML-046 | Q | Data Completeness | CEMS Monitoring Location process units. You did not select any process unit(s) for this CML. |
| CML-047a | Q | Data Completeness | Fraction of methane emissions from CML. This data element is required. |
| CML-051 | Q | Data Completeness | Total Non-biogenic carbon dioxide emissions. This data element is required. |
| CML-052 | Q | Data Completeness | Total Biogenic carbon dioxide emissions. This data element is required. |
| CML-053 | Q | Data Completeness | Total methane (CH4) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-054 | Q | Data Completeness | Total nitrous oxide (N2O) emissions. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-055 | Q | Data Completeness | Total carbon dioxide (CO2) emissions measured by the CEMS. This data element is required. |
| CML-056 | Q | Screen Error | Total annual CO2 mass emissions (biogenic and non-biogenic) measured by the CEMS. This data element must be greater than or equal to biogenic carbon dioxide emissions. |
| CML-057 | Q | Data Completeness | Total number of source operating hours in the reporting year. This data element is required. |
| CML-058 | Q | Data Completeness | The total operating hours in which a substitute data value was used in the emissions calculations for carbon dioxide (CO2) concentration. This data element is required. |
| CML-059 | Q | Screen Error | You have entered a calculation methodology start date that is later than the calculation methodology end date. Please revise and make sure the Start Date is less than the End Date. |
| CML-060 | Q | Screen Error | Calculation methodology start date. This data element is required. Please enter the required data or click CANCEL. |
| CML-061 | Q | Screen Error | Configuration type. This data element is required. Please enter the required data or click CANCEL. |
| CML-062 | Q | Screen Error | Calculation methodology end date. This data element is required. Please enter the required data or click CANCEL. |
| CML-063 | Q | Data Completeness | Carbon dioxide emissions measured in Quarter 1. This data element is required. |
| CML-064 | Q | Screen Error | Carbon dioxide emissions measured in Quarter 1. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-065 | Q | Data Completeness | Carbon dioxide emissions measured in Quarter 2. This data element is required. |
| CML-066 | Q | Screen Error | Carbon dioxide emissions measured in Quarter 2. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-067 | Q | Data Completeness | Carbon dioxide emissions measured in Quarter 3. This data element is required. |
| CML-068 | Q | Screen Error | Carbon dioxide emissions measured in Quarter 3. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-069 | Q | Data Completeness | Carbon dioxide emissions measured in Quarter 4. This data element is required. |
| CML-070 | Q | Screen Error | Carbon dioxide emissions measured in Quarter 4. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| CML-071 | Q | Screen Error | CEMS Monitoring Location Name/ID. This data element is required. Please enter the required data or click CANCEL. |
| CML-072 | Q | Data Completeness | Type(s) of fuel combusted in the unit(s) monitored by the CEMS. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-073 | Q | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-074 | Q | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-075 | Q | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the "Process/stationary combustion units share common stack" configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-076 | Q | Screen Error | Total methane (CH4) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total methane emissions field blank, or click CANCEL. |
| CML-077 | Q | Screen Error | Total nitrous oxide (N2O) emissions. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the value and leave the total nitrous oxide emissions field blank, or click CANCEL. |
| CML-078 | Q | Screen Error | Types of fuel combusted in the unit(s) monitored by the CEMS. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported fuel(s) and leave the types of fuel field blank, or click CANCEL. |
| CML-082 | Q | Data Completeness | Carbon dioxide emissions attributable to combustion. This data element is required for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. |
| CML-083 | Q | Screen Error | Carbon dioxide emissions attributable to combustion. This data element is only required to be reported for CMLs using the \'Process/stationary combustion units share common stack\' configuration type. Please remove the reported emissions and leave the types of emissions field blank, or click CANCEL. |
| CML-086 | Q | Screen Error | The Calculation Methodology Start Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-087 | Q | Screen Error | The Calculation Methodology Start Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the start date is within the current reporting year. |
| CML-088 | Q | Screen Error | The Calculation Methodology End Date is earlier than the first applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| CML-089 | Q | Screen Error | The Calculation Methodology End Date is later than the last applicable day of reporting your Tier 4 Methodology. Please revise and make sure the End Date is within the current reporting year. |
| IVT-Q001 | Q | Screen Error | Annual mass of the solid fuel used. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q002 | Q | Screen Error | Annual mass of the solid fuel used. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q003 | Q | Screen Error | Carbon content of the solid fuel, from the fuel analysis. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q004 | Q | Screen Error | Carbon content of the solid fuel, from the fuel analysis. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q007 | Q | Screen Error | Annual volume of the gaseous fuel used. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q008 | Q | Screen Error | Annual volume of the gaseous fuel used. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q009 | Q | Screen Error | Average carbon content of the gaseous fuel, from the fuel analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q010 | Q | Screen Error | Average carbon content of the gaseous fuel, from the fuel analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q013 | Q | Screen Error | Molecular weight of the gaseous fuel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q014 | Q | Screen Error | Molecular weight of the gaseous fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q017 | Q | Screen Error | Annual volume of the liquid fuel used. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q018 | Q | Screen Error | Annual volume of the liquid fuel used. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q019 | Q | Screen Error | Carbon content of the liquid fuel, from the fuel analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q020 | Q | Screen Error | Carbon content of the liquid fuel, from the fuel analysis results. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q023 | Q | Screen Error | Annual mass of the greenball (taconite) pellets fed to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q024 | Q | Screen Error | Annual mass of the greenball (taconite) pellets fed to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q025 | Q | Screen Error | Carbon content of the greenball (taconite) pellets, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q026 | Q | Screen Error | Carbon content of the greenball (taconite) pellets, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q027 | Q | Screen Error | Annual mass of fired pellets produced by the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q028 | Q | Screen Error | Annual mass of fired pellets produced by the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q029 | Q | Screen Error | Carbon content of the fired pellets, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q030 | Q | Screen Error | Carbon content of the fired pellets, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q031 | Q | Screen Error | Annual mass of air pollution control residue collected. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q032 | Q | Screen Error | Annual mass of air pollution control residue collected. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q033 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q034 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q035 | Q | Screen Error | Mass of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q036 | Q | Screen Error | Mass of other process input containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q037 | Q | Screen Error | Carbon content of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q038 | Q | Screen Error | Carbon content of other process input containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q039 | Q | Screen Error | Mass of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q040 | Q | Screen Error | Mass of other process output containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q041 | Q | Screen Error | Carbon content of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q042 | Q | Screen Error | Carbon content of other process output containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q044 | Q | Data Completeness | You have not yet added any equation inputs data for this input. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q045 | Q | Data Completeness | You have not yet added any equation inputs data for this output. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q046 | Q | Screen Error | Annual mass of molten iron charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q047 | Q | Screen Error | Annual mass of molten iron charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q048 | Q | Screen Error | Carbon content of the molten iron, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q049 | Q | Screen Error | Carbon content of the molten iron, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q052 | Q | Screen Error | Annual mass of ferrous scrap charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q053 | Q | Screen Error | Annual mass of ferrous scrap charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q054 | Q | Screen Error | Carbon content of the ferrous scrap, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q055 | Q | Screen Error | Carbon content of the ferrous scrap, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q058 | Q | Screen Error | Annual mass of flux materials (e.g., limestone, dolomite) charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q059 | Q | Screen Error | Annual mass of flux materials (e.g., limestone, dolomite) charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q060 | Q | Screen Error | Carbon content of the flux materials, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q061 | Q | Screen Error | Carbon content of the flux materials, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q063 | Q | Screen Error | Annual mass of carbonaceous materials (e.g., coal, coke) charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q064 | Q | Screen Error | Annual mass of carbonaceous materials (e.g., coal, coke) charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q065 | Q | Screen Error | Carbon content of the carbonaceous materials, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q066 | Q | Screen Error | Carbon content of the carbonaceous materials, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q069 | Q | Screen Error | Mass of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q070 | Q | Screen Error | Mass of other process input containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q071 | Q | Screen Error | Carbon content of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q072 | Q | Screen Error | Carbon content of other process input containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q073 | Q | Data Completeness | You have not yet added any equation inputs data for this input. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q074 | Q | Screen Error | Annual mass of molten raw steel produced by the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q075 | Q | Screen Error | Annual mass of molten raw steel produced by the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q078 | Q | Screen Error | Carbon content of the steel, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q079 | Q | Screen Error | Carbon content of the steel, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q082 | Q | Screen Error | Annual mass of slag produced by the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q083 | Q | Screen Error | Annual mass of slag produced by the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q084 | Q | Screen Error | Carbon content of the slag, from the carbon analysis. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q085 | Q | Screen Error | Carbon content of the slag, from the carbon analysis. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q086 | Q | Screen Error | Annual mass of air pollution control residue collected. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q087 | Q | Screen Error | Annual mass of air pollution control residue collected. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q088 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q089 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q090 | Q | Screen Error | Mass of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q091 | Q | Screen Error | Mass of other process output containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q092 | Q | Screen Error | Carbon content of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q093 | Q | Screen Error | Carbon content of other process output containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q094 | Q | Data Completeness | You have not yet added any equation inputs data for this output. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q095 | Q | Screen Error | Annual mass of coal charged to the battery. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q096 | Q | Screen Error | Annual mass of coal charged to the battery. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q098 | Q | Screen Error | Carbon content of the coal, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q099 | Q | Screen Error | Carbon content of the coal, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q102 | Q | Screen Error | Mass of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q103 | Q | Screen Error | Mass of other process input containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q104 | Q | Screen Error | Carbon content of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q105 | Q | Screen Error | Carbon content of other process input containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q106 | Q | Data Completeness | You have not yet added any equation inputs data for this input. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q107 | Q | Screen Error | Annual mass of coke produced by the battery. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q108 | Q | Screen Error | Annual mass of coke produced by the battery. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q111 | Q | Screen Error | Carbon content of the coke, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q112 | Q | Screen Error | Carbon content of the coke, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q115 | Q | Screen Error | Annual mass of air pollution control residue collected. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q116 | Q | Screen Error | Annual mass of air pollution control residue collected. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q117 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q118 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q119 | Q | Screen Error | Mass of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q120 | Q | Screen Error | Mass of other process output containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q121 | Q | Screen Error | Carbon content of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q122 | Q | Screen Error | Carbon content of other process output containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q123 | Q | Data Completeness | You have not yet added any equation inputs data for this output. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q124 | Q | Screen Error | Annual volume of the gaseous fuel used. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q125 | Q | Screen Error | Annual volume of the gaseous fuel used. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q126 | Q | Screen Error | Carbon content of the gaseous fuel, from the fuel analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q127 | Q | Screen Error | Carbon content of the gaseous fuel, from the fuel analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q130 | Q | Screen Error | Molecular weight of the gaseous fuel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q131 | Q | Screen Error | Molecular weight of the gaseous fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q134 | Q | Screen Error | Annual mass of sinter feed material. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q135 | Q | Screen Error | Annual mass of sinter feed material. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q136 | Q | Screen Error | Carbon content of the mixed sinter feed materials that form the bed entering the sintering machine, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q137 | Q | Screen Error | Carbon content of the mixed sinter feed materials that form the bed entering the sintering machine, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q138 | Q | Screen Error | Mass of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q139 | Q | Screen Error | Mass of other process input containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q140 | Q | Screen Error | Carbon content of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q141 | Q | Screen Error | Carbon content of other process input containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q142 | Q | Data Completeness | You have not yet added any equation inputs data for this input. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q143 | Q | Screen Error | Annual mass of sinter produced. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q144 | Q | Screen Error | Annual mass of sinter produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q147 | Q | Screen Error | Carbon content of the sinter pellets, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q148 | Q | Screen Error | Carbon content of the sinter pellets, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q149 | Q | Screen Error | Annual mass of air pollution control residue collected. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q150 | Q | Screen Error | Annual mass of air pollution control residue collected. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q151 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q152 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q153 | Q | Screen Error | Mass of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q154 | Q | Screen Error | Mass of other process output containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q155 | Q | Screen Error | Carbon content of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q156 | Q | Screen Error | Carbon content of other process output containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q157 | Q | Data Completeness | You have not yet added any equation inputs data for this output. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q158 | Q | Screen Error | Annual mass of direct reduced iron (if any) charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q159 | Q | Screen Error | Annual mass of direct reduced iron (if any) charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q160 | Q | Screen Error | Carbon content of the direct reduced iron, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q161 | Q | Screen Error | Carbon content of the direct reduced iron, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q164 | Q | Screen Error | Annual mass of ferrous scrap charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q165 | Q | Screen Error | Annual mass of ferrous scrap charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q166 | Q | Screen Error | Carbon content of the ferrous scrap, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q167 | Q | Screen Error | Carbon content of the ferrous scrap, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q170 | Q | Screen Error | Annual mass of flux materials (e.g., limestone, dolomite) charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q171 | Q | Screen Error | Annual mass of flux materials (e.g., limestone, dolomite) charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q172 | Q | Screen Error | Carbon content of the flux materials, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q173 | Q | Screen Error | Carbon content of the flux materials, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q175 | Q | Screen Error | Annual mass of carbon electrode consumed. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q176 | Q | Screen Error | Annual mass of carbon electrode consumed. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q177 | Q | Screen Error | Carbon content of the carbon electrode, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q178 | Q | Screen Error | Carbon content of the carbon electrode, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q181 | Q | Screen Error | Annual mass of carbonaceous materials (e.g., coal, coke) charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q182 | Q | Screen Error | Annual mass of carbonaceous materials (e.g., coal, coke) charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q183 | Q | Screen Error | Carbon content of the carbonaceous materials, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q184 | Q | Screen Error | Carbon content of the carbonaceous materials, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q187 | Q | Screen Error | Annual volume of the gaseous fuel used. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q188 | Q | Screen Error | Annual volume of the gaseous fuel used. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q189 | Q | Screen Error | Average carbon content of the gaseous fuel, from the fuel analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q190 | Q | Screen Error | Average carbon content of the gaseous fuel, from the fuel analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q191 | Q | Screen Error | Molecular weight of the gaseous fuel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q192 | Q | Screen Error | Molecular weight of the gaseous fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q193 | Q | Screen Error | Mass of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q194 | Q | Screen Error | Mass of other process input containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q195 | Q | Screen Error | Carbon content of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q196 | Q | Screen Error | Carbon content of other process input containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q197 | Q | Data Completeness | You have not yet added any equation inputs data for this input. Please use the Inputs Verifier Tool to enter equation inputs for each process input and process output and calculate a result for this unit. |
| IVT-Q198 | Q | Screen Error | Annual mass of molten raw steel produced by the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q199 | Q | Screen Error | Annual mass of molten raw steel produced by the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q202 | Q | Screen Error | Carbon content of the steel, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q205 | Q | Screen Error | Annual mass of slag produced by the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q206 | Q | Screen Error | Annual mass of slag produced by the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q207 | Q | Screen Error | Carbon content of the slag, from the carbon analysis. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q208 | Q | Screen Error | Carbon content of the slag, from the carbon analysis. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q209 | Q | Screen Error | Annual mass of air pollution control residue collected. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q210 | Q | Screen Error | Annual mass of air pollution control residue collected. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q211 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q212 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q213 | Q | Screen Error | Mass of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q214 | Q | Screen Error | Mass of other process output containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q215 | Q | Screen Error | Carbon content of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q216 | Q | Screen Error | Carbon content of other process output containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q217 | Q | Data Completeness | You have not yet added any equation inputs data for this output. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q218 | Q | Screen Error | Annual mass of molten steel charged to the vessel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q219 | Q | Screen Error | Annual mass of molten steel charged to the vessel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q220 | Q | Screen Error | Carbon content of the molten steel before decarburization, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q221 | Q | Screen Error | Carbon content of the molten steel before decarburization, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q224 | Q | Screen Error | Carbon content of the molten steel after decarburization, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q225 | Q | Screen Error | Carbon content of the molten steel after decarburization, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q228 | Q | Screen Error | Mass of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q229 | Q | Screen Error | Mass of other process input containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q230 | Q | Screen Error | Carbon content of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q231 | Q | Screen Error | Carbon content of other process input containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q232 | Q | Data Completeness | You have not yet added any equation inputs data for this input. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q233 | Q | Screen Error | Annual mass of air pollution control residue collected. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q234 | Q | Screen Error | Annual mass of air pollution control residue collected. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q235 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q236 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q237 | Q | Screen Error | Mass of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q238 | Q | Screen Error | Mass of other process output containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q239 | Q | Screen Error | Carbon content of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q240 | Q | Screen Error | Carbon content of other process output containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q241 | Q | Data Completeness | You have not yet added any equation inputs data for this output. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q242 | Q | Screen Error | Annual volume of the gaseous fuel used. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q243 | Q | Screen Error | Annual volume of the gaseous fuel used. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q244 | Q | Screen Error | Average carbon content of the gaseous fuel, from the fuel analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q245 | Q | Screen Error | Average carbon content of the gaseous fuel, from the fuel analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q248 | Q | Screen Error | Molecular weight of the gaseous fuel. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q249 | Q | Screen Error | Molecular weight of the gaseous fuel. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q252 | Q | Screen Error | Annual mass of iron ore or iron pellets fed to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q253 | Q | Screen Error | Annual mass of iron ore or iron pellets fed to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q254 | Q | Screen Error | Carbon content of the iron ore or iron pellets, from the carbon analysis. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q255 | Q | Screen Error | Carbon content of the iron ore or iron pellets, from the carbon analysis. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q256 | Q | Screen Error | Annual mass of carbonaceous materials (e.g., coal, coke) charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q257 | Q | Screen Error | Annual mass of carbonaceous materials (e.g., coal, coke) charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q258 | Q | Screen Error | Carbon content of the carbonaceous materials, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q259 | Q | Screen Error | Carbon content of the carbonaceous materials, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q262 | Q | Screen Error | Annual mass of other materials charged to the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q263 | Q | Screen Error | Annual mass of other materials charged to the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q264 | Q | Screen Error | Average carbon content of the other materials charged to the furnace, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q265 | Q | Screen Error | Average carbon content of the other materials charged to the furnace, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q266 | Q | Screen Error | Mass of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q267 | Q | Screen Error | Mass of other process input containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q268 | Q | Screen Error | Carbon content of other process input containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q269 | Q | Screen Error | Carbon content of other process input containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q270 | Q | Data Completeness | You have not yet added any equation inputs data for this input. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q271 | Q | Data Completeness | You have not yet added any equation inputs data for this unit. Please use the Inputs Verifier Tool to enter the annual mass of coal charged and calculate a result for this unit. |
| IVT-Q272 | Q | Screen Error | Annual total coal charged to the coke ovens. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q273 | Q | Screen Error | Annual total coal charged to the coke ovens. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q278 | Q | Data Quality | Annual CO2 mass emissions. The calculated value is less than zero. |
| IVT-Q280 | Q | Screen Error | Annual mass of iron produced. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q281 | Q | Screen Error | Annual mass of iron produced. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q282 | Q | Screen Error | Carbon content of the iron, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q283 | Q | Screen Error | Carbon content of the iron, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q284 | Q | Screen Error | Annual mass of non-metallic materials produced by the furnace. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q285 | Q | Screen Error | Annual mass of non-metallic materials produced by the furnace. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q286 | Q | Screen Error | Carbon content of the non-metallic materials, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q287 | Q | Screen Error | Carbon content of the non-metallic materials, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q288 | Q | Screen Error | Annual mass of air pollution control residue collected. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q289 | Q | Screen Error | Annual mass of air pollution control residue collected. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q290 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q291 | Q | Screen Error | Carbon content of the air pollution control residue, from the carbon analysis results. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q292 | Q | Screen Error | Mass of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q293 | Q | Screen Error | Mass of other process output containing carbon. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q294 | Q | Screen Error | Carbon content of other process output containing carbon. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q295 | Q | Screen Error | Carbon content of other process output containing carbon. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Q296 | Q | Data Completeness | You have not yet added any equation inputs data for this output. Please use the Inputs Verifier Tool to enter equation inputs for each input and output and calculate a result for this unit. |
| IVT-Q297 | Q | Screen Error | Carbon content of the steel, from the carbon analysis results. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q298 | Q | Data Completeness | You have not yet added any equation inputs data for this unit. Please use the Inputs Verifier Tool to enter equation inputs and calculate a result for this unit. |
| IVT-Q299 | Q | Screen Error | Average hourly feed or production rate during the test. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q300 | Q | Screen Error | Average hourly feed or production rate during the test. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q301 | Q | Screen Error | Annual total feed or production, as applicable. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q302 | Q | Screen Error | Annual total feed or production, as applicable. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q304 | Q | Screen Error | High Heat Value. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q305 | Q | Screen Error | Fuel Type. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q306 | Q | Screen Error | Volume of the fuel combusted during the reporting year. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q307 | Q | Screen Error | CH4 Emission factor. This data element is required if you select "Other Gas" as fuel type. Please enter the required data or click CANCEL. |
| IVT-Q308 | Q | Screen Error | N2O Emission factor. This data element is required if you select "Other Gas" as fuel type. Please enter the required data or click CANCEL. |
| IVT-Q309 | Q | Screen Error | CH4 Emission factor. You must enter a value that is greater than or equal to zero. Please enter the required data or click CANCEL. |
| IVT-Q310 | Q | Screen Error | N2O Emission factor. You must enter a value that is greater than or equal to zero. Please enter the required data or click CANCEL. |
| IVT-Q311 | Q | Screen Error | Fuel Type. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q312 | Q | Screen Error | CO2 emission factor. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Q313 | Q | Screen Error | CO2 emission factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Q314 | Q | Data Completeness | You have not yet added any equation inputs data for the annual methane or nitrous oxide emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation C-9a and calculate a result for this flare. |
| IVT-Q315 | Q | Data Completeness | You have not yet added any equation inputs data for the annual methane or nitrous oxide emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation C-9a and calculate a result for this flare. |
| IVT-Q316 | Q | Data Completeness | You have not yet added any equation inputs data for the annual methane or nitrous oxide emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation C-9a and calculate a result for this flare. |
| IVT-Q317 | Q | Data Completeness | You have not yet added any equation inputs data for the annual methane or nitrous oxide emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation C-9a and calculate a result for this flare. |
| IVT-Y0001 | Q | Screen Error | Unit "{1}" was found in the inputs data but not in the GHG report data. |
| IVT-Y0002 | Q | Screen Error | Unit "{1}" was found in the GHG report data but not in the inputs data. |
| IVT-Y03201 | Q | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y03202 | Q | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y03203 | Q | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y1B000 | Q | Data Completeness | You have not yet added any equation inputs data for the annual CO2 emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation Y-1b and calculate a result for this flare. |
| IVT-Y1B001 | Q | Screen Error | Molar Volume Conversion Factor. This data element is required. Please select either of the two values provided below. |
| IVT-Y1B002 | Q | Screen Error | Volume of flare gas combusted during {1}. This data element is required. Please enter the required value. |
| IVT-Y1B003 | Q | Screen Error | Volume of flare gas combusted during {1}. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y1B005 | Q | Screen Error | Mole percent CO2 concentration in the flare gas stream during {1}. This data element is required. Please enter the required value. |
| IVT-Y1B006 | Q | Screen Error | Mole percent CO2 concentration in the flare gas stream during {1}. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-Y1B008 | Q | Screen Error | Mole percent concentration of compound {1} in the flare gas stream during the measurement period. This data element is required. Please enter the required value. |
| IVT-Y1B009 | Q | Screen Error | Mole percent concentration of compound {1} in the flare gas stream during the measurement period. You must enter a value that is greater than or equal to zero and less than or equal to 100. You must correct the current value before continuing. |
| IVT-Y1B010 | Q | Screen Error | Carbon mole number of compound {1} in the flare gas stream. This data element is required. Please enter the required value. |
| IVT-Y1B013 | Q | Data Completeness | You have not yet added any equation inputs data for compound number {1}. Please use the Inputs Verifier Tool to enter compound inputs for Equation Y-1B and calculate a result for this flare. |
| IVT-Y3000 | Q | Data Completeness | You have not yet added any equation inputs data for the annual CO2 emissions from this flare. Please use the Inputs Verifier Tool to enter inputs for Equation Y-3 and calculate a result for this flare. |
| IVT-Y3001 | Q | Screen Error | Annual volume of flare gas combusted during normal operations from company records. This data element is required. Please enter the required data. |
| IVT-Y3002 | Q | Screen Error | Annual volume of flare gas combusted during normal operations from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y3004 | Q | Screen Error | Higher Heating Value for fuel gas or flare gas from company records. This data element is required. Please enter the required data. |
| IVT-Y3005 | Q | Screen Error | Higher Heating Value for fuel gas or flare gas from company records. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| IVT-Y3008 | Q | Screen Error | Molar volume Conversion Factor. This data element is required. Please select either of the two values provided below. |
| IVT-Y3009 | Q | Screen Error | Volume of flare gas combusted during indexed start-up, shutdown, or malfunction event number(s) [{1}] from engineering calculations. You must enter a value that is greater than or equal to zero. |
| IVT-Y3012 | Q | Screen Error | Average molecular weight of the flare gas, from the analysis results or engineering calculations for event number(s) [{1}]. This data element is required. Please enter the required value. |
| IVT-Y3013 | Q | Screen Error | Average molecular weight of the flare gas, from the analysis results or engineering calculations for event number(s) [{1}]. You must enter a value that is greater than or equal to zero. |
| IVT-Y3016 | Q | Screen Error | Average carbon content of the flare gas, from analysis results or engineering calculations for event number(s) [{1}]. This data element is required. Please enter the required value. |
| IVT-Y3017 | Q | Screen Error | Average carbon content of the flare gas, from analysis results or engineering calculations for event number(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y3020 | Q | Screen Error | Volume of flare gas combusted during indexed start-up, shutdown, or malfunction event number(s) [{1}] from engineering calculations. This data element is required. Please enter the required value. |
| IVT-Y3021 | Q | Screen Error | Volume of flare gas combusted during indexed start-up, shutdown, or malfunction event number(s) [{1}] from engineering calculations. You must enter a value that is greater than or equal to zero. |
| IVT-Y3022 | Q | Screen Error | Average molecular weight of the flare gas, from the analysis results or engineering calculations for event number(s) [{1}]. You must enter a value that is greater than or equal to zero. |
| IVT-Y3023 | Q | Screen Error | Average carbon content of the flare gas, from analysis results or engineering calculations for event number(s) [{1}]. You must enter a value that is greater than or equal to zero and less than or equal to one. You must correct the current value before continuing. |
| IVT-Y3024 | Q | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y3026 | Q | Screen Error | Enter Own result for Annual CO2 emissions from this flare. This data element is required if you select Enter/Report Alternate Result. |
| IVT-Y3031 | Q | Screen Error | Fuel Type. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y3032 | Q | Screen Error | CO2 emission factor. This data element is required. Please enter the required data or click CANCEL. |
| IVT-Y3033 | Q | Screen Error | CO2 emission factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Q002 | Q | Screen Error | Unit Name or ID. This data element is required. Please enter the required data or click CANCEL. |
| Q003 | Q | Screen Error | Unit Type. This data element is required. |
| Q005 | Q | Screen Error | Input or Output Name. This data element is required. Please enter the required data or click CANCEL. |
| Q006 | Q | Data Completeness | Input or Output Type. This data element is required. |
| Q007 | Q | Data Completeness | Annual CO2 mass emissions. This data element is required. |
| Q008 | Q | Screen Error | Annual CO2 mass emissions. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Q016 | Q | Data Completeness | Number of months that missing data procedures were followed. This data element is required. Please enter the required data. |
| Q017 | Q | Screen Error | Number of months that missing data procedures were followed. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. |
| Q019 | Q | Data Completeness | Carbon content determination method. This data element is required. |
| Q020 | Q | Data Completeness | Carbon content determination method. You selected "Other (specify)" from the pick list provided, but failed to provide any additional information in the "Specify carbon content determination method" text box provided. This data element is required. |
| Q025 | Q | Screen Error | The number of times that missing data procedures were followed and the performance test was repeated to determine the site-specific emission factor. This value should be reported as a number of months in the reporting year, and should be within the range of 0 to 12 (months). The value you provided is outside that range. You must correct the current value before continuing. |
| Q026 | Q | Data Completeness | Annual production of taconite pellets (metric tons). This data element is required. Please enter the required data. |
| Q027 | Q | Data Completeness | Annual production of molten raw steel (metric tons). This data element is required. Please enter the required data. |
| Q029 | Q | Data Completeness | Annual production of sinter (metric tons). This data element is required. Please enter the required data. |
| Q031 | Q | Screen Error | Annual production of taconite pellets (metric tons). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Q032 | Q | Screen Error | Annual production of molten raw steel (metric tons). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Q034 | Q | Screen Error | Annual production of sinter (metric tons). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Q035 | Q | Screen Error | Annual production of direct reduced iron (metric tons). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Q036 | Q | Data Completeness | You have selected Subpart Q for reporting, but you have not yet added a unit. |
| Q039 | Q | Data Completeness | You have not yet added an input for this unit. |
| Q040 | Q | Data Completeness | You have not yet added an output for this unit. |
| Q041 | Q | Data Completeness | Method used to develop the substitute data value(s). This data element is required. |
| Q042 | Q | Screen Error | Average hourly CO2 emission rate during the test. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| Q043 | Q | Data Completeness | Annual CO2 mass emissions. This data element is required. |
| Q044 | Q | Screen Error | Annual CO2 mass emissions (metric tons). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Q051 | Q | Data Completeness | Annual mass of all non-fuel material inputs (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). This data element is required. |
| Q052 | Q | Screen Error | Annual mass of all non-fuel material inputs (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| Q054 | Q | Data Completeness | Weighted average carbon content of all non-fuel material inputs (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). This data element is required. |
| Q055 | Q | Screen Error | Weighted average carbon content of all non-fuel material inputs (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing, or click CANCEL. |
| Q057 | Q | Data Completeness | Annual mass of all solid and liquid products and byproducts (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). This data element is required. |
| Q058 | Q | Screen Error | Annual mass of all solid and liquid products and byproducts (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| Q060 | Q | Data Completeness | Weighted average carbon content of all solid and liquid products and byproducts (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). This data element is required. |
| Q061 | Q | Screen Error | Weighted average carbon content of all solid and liquid products and byproducts (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing, or click CANCEL. |
| Q062 | Q | Screen Error | Enter Own Result for Annual CO2 mass emissions. This data element is required if you select Enter/Report Alternate Result. |
| Q063 | Q | Data Completeness | Average hourly CO2 emission rate during the test. This data element is required. |
| Q065 | Q | Data Completeness | Annual mass of all gaseous, liquid, and solid fuels (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). This data element is required. |
| Q066 | Q | Screen Error | Annual mass of all gaseous, liquid, and solid fuels (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). You must enter a value that is greater than or equal to zero. You must correct the current value before continuing, or click CANCEL. |
| Q068 | Q | Data Completeness | Weighted average carbon content of all gaseous, liquid, and solid fuels (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). This data element is required. |
| Q069 | Q | Screen Error | Weighted average carbon content of all gaseous, liquid, and solid fuels (combined) used in process units where CO2 emissions were calculated using the mass balance methodology (Equations Q-1 through Q-7). You must enter a value that is greater than or equal to zero and less than or equal to 1. You must correct the current value before continuing, or click CANCEL. |
| Q071 | Q | Data Completeness | Annual production of Coke (metric tons). This data element is required. Please enter the required data. |
| Q072 | Q | Data Completeness | Annual production of Direct Reduced Iron (metric tons). This data element is required. Please enter the required data. |
| Q073 | Q | Screen Error | Unit Name or ID. This data element contains special characters. Please re-enter a new name or click CANCEL. |
| Q074 | Q | Screen Error | Input or Output Name. This data element contains special characters. Please re-enter a new name or click CANCEL. |
| Y192 | Q | Data Completeness | Type of flare. This data element is required. Please make a selection. |
| Y193 | Q | Data Completeness | Flare service type. This data element is required. Please make a selection. |
| Y194 | Q | Data Completeness | Flare service type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y195 | Q | Screen Error | Method used to calculate the CO2 emissions. This data element is required. Please make a selection or click CANCEL. |
| Y196 | Q | Screen Error | Equation Y-1a Inputs Method. This data element is required. Please make a selection or click CANCEL. |
| Y201 | Q | Data Completeness | Annual CO2 emissions from this flare. This data element is required. Please enter the required data. |
| Y202 | Q | Screen Error | Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y204 | Q | Data Completeness | Frequency of measurement data. This data element is required. Please make a selection. |
| Y205 | Q | Data Completeness | Annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y206 | Q | Screen Error | Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y208 | Q | Data Completeness | Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y209 | Q | Screen Error | Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y211 | Q | Data Completeness | Annual average molecular weight. This data element is required. Please enter the required data. |
| Y212 | Q | Screen Error | Annual average molecular weight. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y214 | Q | Data Completeness | Method(s) used to determine the molecular weight of the flare gas. This data element is required. |
| Y215 | Q | Data Completeness | Number of days missing data procedures were used for annual average molecular weight of the flare gas. This data element is required. Please enter the required data. |
| Y216 | Q | Screen Error | Number of days missing data procedures were used for annual average molecular weight of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y218 | Q | Data Completeness | Annual average carbon content of the flare gas. This data element is required. Please enter the required data. |
| Y219 | Q | Screen Error | Annual average carbon content of the flare gas. This value should be reported as a percentage expressed as a decimal fraction, and should be within the range of 0 to 1 (UNITS). The value you provided is outside that range. You must correct the current value before continuing. |
| Y221 | Q | Data Completeness | Method(s) used to determine the carbon content of the flare gas. This data element is required. |
| Y222 | Q | Data Completeness | Number of days missing data procedures were used for average carbon content of the flare gas. This data element is required. Please enter the required data. |
| Y223 | Q | Screen Error | Number of days missing data procedures were used for average carbon content of the flare gas. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y225 | Q | Data Completeness | Annual CO2 emissions from this flare. This data element is required. Please enter the required data. |
| Y226 | Q | Screen Error | Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y228 | Q | Data Completeness | Frequency of measurement data. This data element is required. Please make a selection. |
| Y229 | Q | Data Completeness | Annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y230 | Q | Screen Error | Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y232 | Q | Data Completeness | Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y233 | Q | Screen Error | Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y235 | Q | Data Completeness | Annual average CO2 concentration. This data element is required. Please enter the required data. |
| Y236 | Q | Screen Error | Annual average CO2 concentration. This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. |
| Y238 | Q | Data Completeness | Method used to determine the annual average CO2 concentration. This data element is required. |
| Y239 | Q | Data Completeness | Number of days missing data procedures were used for annual average CO2 concentration. This data element is required. Please enter the required data. |
| Y240 | Q | Screen Error | Number of days missing data procedures were used for annual average CO2 concentration. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y242 | Q | Data Completeness | Annual CO2 emissions from this flare. This data element is required. Please enter the required data. |
| Y243 | Q | Screen Error | Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y245 | Q | Data Completeness | Frequency of measurement data. This data element is required. Please make a selection. |
| Y246 | Q | Data Completeness | Annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y247 | Q | Screen Error | Annual volume of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y249 | Q | Data Completeness | Number of days missing data procedures were used for annual volume of flare gas combusted. This data element is required. Please enter the required data. |
| Y250 | Q | Screen Error | Number of days missing data procedures were used for annual volume of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y252 | Q | Data Completeness | Conditions on which the annual volume of flare gas was determined. This data element is required. Please make a selection. |
| Y253 | Q | Data Completeness | Annual average higher heating value of the flare gas combusted. This data element is required. Please enter the required data. |
| Y254 | Q | Screen Error | Annual average higher heating value of the flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y256 | Q | Data Completeness | Method used to determine the annual average higher heating value. This data element is required. |
| Y257 | Q | Data Completeness | Number of days missing data procedures were used for annual average higher heating value. This data element is required. Please enter the required data. |
| Y258 | Q | Screen Error | Number of days missing data procedures were used for annual average higher heating value. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y260 | Q | Data Completeness | Conditions on which the annual average higher heating value was determined. This data element is required. Please make a selection. |
| Y261 | Q | Data Completeness | Annual CO2 emissions from this flare. This data element is required. Please enter the required data. |
| Y262 | Q | Screen Error | Annual CO2 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y264 | Q | Data Completeness | Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. This data element is required. Please enter the required data. |
| Y265 | Q | Screen Error | Total number of start-up, shutdown, or malfunction (SSM) events exceeding 500,000 scf/day. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y423 | Q | Screen Error | Annual average concentration of each carbon-containing compound (other than CO2). This data element is required. Please enter the required data or click CANCEL. |
| Y424 | Q | Screen Error | Annual average concentration of each carbon-containing compound (other than CO2). This value should be reported as a percentage expression, and should be within the range of 0 to 100 (percent). The value you provided is outside that range. You must correct the current value before continuing. |
| Y426 | Q | Screen Error | Method(s) used to determine the annual average concentration of the carbon-containing compound(s). This data element is required. |
| Y426a | Q | Screen Error | Method(s) used to determine the annual average concentration of the carbon-containing compound(s). You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y427 | Q | Screen Error | Number of days missing data procedures were used for annual average concentration of carbon in the compound. This data element is required. Please enter the required data or click CANCEL. |
| Y428 | Q | Screen Error | Number of days missing data procedures were used for annual average concentration of carbon in the compound. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
| Y430 | Q | Data Completeness | Annual CH4 emissions from this flare. This data element is required. Please enter the required data. |
| Y431 | Q | Screen Error | Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y438 | Q | Data Completeness | Annual N2O emissions from this flare. This data element is required. Please enter the required data. |
| Y439 | Q | Screen Error | Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y442 | Q | Data Completeness | Carbon-containing compound (other than carbon dioxide) in flare gas stream. You must enter at least one carbon-containing compound other than carbon dioxide in flare gas stream. This is a required field. |
| Y452 | Q | Data Completeness | Method(s) used to determine the molecular weight of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y453 | Q | Data Completeness | Method(s) used to determine the carbon content of the flare gas. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y454 | Q | Data Completeness | Method used to determine the annual average CO2 concentration. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y455 | Q | Data Completeness | Method used to determine the annual average higher heating value. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y491 | Q | Data Completeness | Flare type. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y495 | Q | Data Completeness | Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. |
| Y496 | Q | Data Completeness | Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. |
| Y497 | Q | Data Completeness | Specific consensus-based standard method or describe the procedure specified by the flow meter manufacturer. This data element is required. Please enter the required data. |
| Y505 | Q | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y506 | Q | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y507 | Q | Data Completeness | Basis for the fraction of carbon in the flare gas contributed by methane. You selected "other" from the pick list provided, but failed to provide any additional information in the text box provided. This data element is required. |
| Y511 | Q | Data Completeness | Annual CH4 emissions from this flare. This data element is required. Please enter the required data. |
| Y512 | Q | Data Completeness | Annual CH4 emissions from this flare. This data element is required. Please enter the required data. |
| Y513 | Q | Data Completeness | Annual CH4 emissions from this flare. This data element is required. Please enter the required data. |
| Y514 | Q | Screen Error | Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y515 | Q | Screen Error | Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y516 | Q | Screen Error | Annual CH4 emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y520 | Q | Data Completeness | Annual N2O emissions from this flare. This data element is required. Please enter the required data. |
| Y521 | Q | Data Completeness | Annual N2O emissions from this flare. This data element is required. Please enter the required data. |
| Y522 | Q | Data Completeness | Annual N2O emissions from this flare. This data element is required. Please enter the required data . |
| Y526 | Q | Screen Error | Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y527 | Q | Screen Error | Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y528 | Q | Screen Error | Annual N2O emissions from this flare. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y538 | Q | Screen Error | Fuel Type. This data element is required. Please enter the required data or click CANCEL. |
| Y539 | Q | Screen Error | CO2 emission factor. This data element is required. Please enter the required data or click CANCEL. |
| Y540 | Q | Screen Error | CO2 emission factor. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y555 | Q | Data Completeness | Is the flare serviced by a flare gas recovery system? This data element is required. Please make a selection. |
| Y590 | Q | Data Completeness | Annual mass of flare gas combusted. This data element is required. Please enter the required data. |
| Y591 | Q | Screen Error | Annual mass of flare gas combusted. You must enter a value that is greater than or equal to zero. You must correct the current value before continuing. |
| Y593 | Q | Data Completeness | Method(s) used to determine the mass of flare gas. This data element is required. Please enter the required data. |
| Y594 | Q | Data Completeness | Number of days missing data procedures were used for annual mass of flare gas combusted. This data element is required. Please enter the required data. |
| Y595 | Q | Screen Error | Number of days missing data procedures were used for annual mass of flare gas combusted. This value should be reported as a number of days in the reporting year, and should be within the range of 0 to 366 (days). The value you provided is outside that range. You must correct the current value before continuing. |
Overview
Content Tools
ThemeBuilder
Tasks